Panel-PC
with IP65 all-around protection
Dust?
Dirt?
Splash water?
Rough handling?
We integrate our FlexLine and SlimLine panel PCs in slim and extremely rugged protective housings.
By doing this, we achieve a protection category which corresponds with the strict IP65 Standard, respectively, according to DIN EN 60529.
The IP-Code „Ingress Protection“
- Protection class IP65 requires the following properties:
- Full protection against contact
- Absolutely dust-proof
- Protection against water jets from all sides
Construction and technology
Flexline 12-M / 15-M / 17-M + housing CC 4000 = IP65 protection
Slimline 15-M / 17-M / 19-M + housing CC 4000 = IP54 protection
Advantages of fully cased panel PCs
The panel PC is not only protected against dust, dirt and water entry. Due to the complete encasement with a robust housing, a high degree of mechanical protection is achieved. The rugged aluminium profiles of the housings effectively prevent the panel PCs from physical damage.
All connections of the FlexLine panel PCs are also safely located inside and are thus protected. The cables are lead through the bottom (or optionally the top) of the housing through a sealed socket.
Data:
- Housing CC-4000
- Material: Aluminium
- Surface: Powder-coated RAL 5010 (blue) and RAL 7035 (grey)
- Dimensions (WxHxD):
FlexLine 12-M: 594 × 453 × 200 mm
FlexLine 15-M: 594 × 453 × 200 mm
FlexLine 17-M: 594 × 453 × 200 mm
SlimLine 15-M: 542 × 452 × 200 mm
SlimLine 17-M: 594 × 453 × 200 mm
SlimLine 19-M: 594 × 497 × 200 mm - Support arm mounting system: with internal top and bottom wiring
- Protection class: IP65 all-around
- Numerous other housing alternatives are also possible on request, as well as various input devices, integrated control elements, housing sizes and any RAL colours.
- For easy and steady mounting of the IP65 housings we offer you, depending on your requirements, various mounting possibilities with integrated wiring.
Accessories for CC-4000 housing:
| Mounting system | Part no. | Component | Application |
|---|---|---|---|
| wall mounting hinge 60 mm | TL-1016466000 | (1) |  |
| pipe 60 × 1000 mm | TL- 9526042000 | (2) | |
| angle 60 mm 90° | TL-1016707000 | (3) | |
| housig adaptor 60 mm | TL-1016701000 | (4) | |
| stand 140×140mm screwable onto the floor |
TL-1016468000 | (5) | |
| wall angle bracket set 195×50×4mm with cable feedthrough |
7002093 7002094 |
(6) |
| Components (illustrations similar) | |||||
|---|---|---|---|---|---|
| (1) | (2) | (3) | (4) | (5) | (6) |
 |
 |
 |
 |
 |
 |
| Mounting Set | Components | Price |
|---|---|---|
| Support Arm Set SL | (1) + (2) + (3) + (4) | 610,00 € |
| Stand Set SL | (2) + (4) + (5) | 330,00 € |
| Wall Mounting Set | (6) | 45,00 € |
Various tilt & swivel adaptors, angles and extensions and a support arm system for ceiling mount are also available upon request. If required, additional integrated input and control elements can be realised in a custom-made solution.